Skip to main content
BIS Institutional Specifications

Institutional Product Suite & Technical Standards

Direct rolling mill manufactured MS Flats (Patti), MS Round Bars (Gol), and MS Square Bars (Chakor) per BIS IS 2062 Grade E250 at our Bhiwadi facility.

IS 2062:2011 Grade E25036,000 TPA

MS Flats / Patti (Flat Steel Strips)

High-Tensile Rolled Patti Sections for Fabrication, Clamps & Earthing

Hot-rolled flat rectangular mild steel strips (Patti) manufactured in widths from 50 mm to 150 mm and thicknesses from 5 mm to 40 mm per IS 2062 Grade E250. Engineered with crisp square edges, uniform gauge, and high ductility for substation earthing, base plates, conveyor slats, and structural gussets.

Available Sizes & SectionsWidths: 50, 65, 75, 100, 125, 150 mm | Thicknesses: 5, 6, 8, 10, 12, 16, 20, 25, 32, 40 mm (Weight: 2.36 to 47.10 kg/m)
Target Applications:
  • Substation Electrical Earthing & Grounding Grids (50x6, 75x10, 100x12 mm)
  • Structural Column Base Plates & Anchor Washers
  • Heavy Truss Flange Joint Plates & Gusset Splices
IS 2062:2011 Grade E25036,000 TPA

MS Round Bars / Gol (Solid Cylindrical Rods)

Precision Hot-Rolled Cylindrical Solid Rods (Gol) for Bolts, Shafts & Bracing

Hot-rolled smooth mild steel round bars (Gol rods) manufactured with tight dimensional tolerances, uniform circularity, and excellent machinability/thread-cutting surface finish per IS 2062 Grade E250. Essential for foundation anchor J-bolts, sag rods, tie rods, turnbuckles, cross bracing, and industrial engineering shafts.

Available Sizes & SectionsDiameters: 25, 30, 32, 40, 50, 56, 60, 63 mm Ø (Weight: 3.85 to 24.47 kg/m)
Target Applications:
  • Heavy Foundation Anchor J-Bolts, L-Bolts & Base Ties
  • Industrial Shed Cross Bracing, Sag Rods & Tie Rods
  • Industrial Turnbuckles & High-Load Threaded Rods
IS 2062:2011 Grade E25036,000 TPA

MS Square Bars / Chakor (Cuboidal Solid Rods)

Solid Cuboidal Square Steel Bars for Machining, Grilles & Heavy Rails

Hot-rolled solid cuboidal mild steel square bars (Chakor) manufactured per BIS IS 2062 Grade E250. Characterized by uniform square cross-sections with sharp 90-degree corners, excellent weldability, and torsional rigidity. Widely used for crane rails, heavy security grilles, industrial gate frames, machining blocks, and equipment guide tracks.

Available Sizes & SectionsSquare Sizes: 25x25, 32x32, 40x40, 50x50 mm (Weight: 4.91 to 19.63 kg/m)
Target Applications:
  • Industrial Overhead Crane Rails & Track Guides
  • Heavy Security Grilles, Factory Gates & Balustrades
  • Machining Blanks, Tool Mounts & Equipment Slides
BIS Technical Standard Comparison

IS 2062 vs IS 1786 Specification Matrix

→
Technical CriterionIS 2062 Structural SteelIS 1786 Fe-500D TMT Bars
Primary ApplicationHeavy industrial framing, bridges, sheds & towersHigh-rise civil foundations, RCC pillars & beams
Chemical Carbon CapMax 0.23% (High Weldability)Max 0.25% (Controlled Equivalent)
Minimum Yield Strength250 MPa (E250 Grade)500 MPa (Fe-500D Ductile)
Tensile Strength Range410 – 540 MPaMin 565 MPa (High Strain)
Elongation at FractureMin 23%Min 16% (Seismic Zone Proof)
Lab Quality Seal BIS License CM/L-123456 BIS License CM/L-789012
Quote